Great-planes V-Pitch Variable Pitch Prop System - GPMG4501 Manuale Utente Scaricare il pdf

Variable Pitch Prop Specifications:

Mechanical Design:

Push-Pull System

Blades (2):

Symmetrical Design, Fiber-Reinforced Nylon

Rotor Materials:

ABS Plastic and Aluminum

Control Rod Material:

Steel

Control Rod Dimensions:

0.04 x 6.02 in. (1 x 153mm)

Ball Bearings (5):

Shielded

Motor Specifications:

Input Voltage:

7.2 – 12V

kV Rating:

1000 rpm/volt

Max. Constant Current:

11A

Max. Surge Current:

15A

No Load Current:

0.65A

Internal Resistance:

235 milli-ohms

Ball Bearings (2):

Shielded

Motor Diameter/Length:

1.10 x 1.14 in. (28 x 29mm)

Shaft Diameter/Length:

0.16 x 1.73 in. (4 x 44mm)

Total Weight (VPP and Motor):

2.1 oz. (59.5 g)

The following hardware is included in the V-Pitch System:

M3 x 16 bolts, hex (2, factory installed)

M3 nuts (2, factory installed)

M3 x 8 bolts, hex (2, factory installed)

M3 set screws (5, factory installed)

M3 x 5 round head bolts (3)

❏ 1. Locate the template for marking the servo location and

the exit slot for the V-Pitch actuating shaft.

❏ 2. Place the template directly over the bottom fuselage

doubler that is required for the Firewall-Mounted installation.

Trace the template with a fine marker or pen accordingly. Only

trace the template on one side of the plane.

❏ 3. With a sharp hobby knife, cut the servo slot completely

through both sides of the fuselage as shown. Cut the slot for

the servo actuating shaft only on the side you traced as shown.

™

These installation instructions for the V-Pitch Variable Pitch Prop System are designed

specifically for use with all Great Planes FlatOut

™

models. Please follow the “Firewall-Mounted

Motor System” instructions in your FlatOut manual before proceeding any further.

Additional items you will need to upgrade your FlatOut with the V-Pitch system are: One 17 oz/in micro servo, a

brushless ESC with governor (ElectriFly’s BL-12, GPMM2075) and a 5-channel micro receiver.

Printed in China

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Low Throttle Stick

Full Throttle Stick

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Negative Pitch

Positive Pitch

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Low Throttle Stick

Full Throttle Stick

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Low Throttle Stick

Full Throttle Stick

Zero Pitch

Without Governor Mode Set in the ESC:

Throttle (Normal) Pitch (Normal)

Throttle (Idle Up) Pitch (Idle Up)

For replacement items or support on this or any other ElectriFly item, please contact:

productsuppor[email protected]

217-398-8970

www.hobbyservices.com

217-398-0007

1 2 3 4

Sommario

Pagina 1 - Printed in China

Variable Pitch Prop Specifications:Mechanical Design:Push-Pull SystemBlades (2):Symmetrical Design, Fiber-Reinforced NylonRotor Materials:ABS Plastic

Pagina 2 - Radio Set-Up for V-Pitch

❏ 4. Cut the shaft to length as shown above, but be sure thatthe blade holders are completely neutral (not pitching forwardor backward) when doing thi

Pagina 3

❏ 4. Cut the shaft to length as shown above, but be sure thatthe blade holders are completely neutral (not pitching forwardor backward) when doing thi

Pagina 4

Variable Pitch Prop Specifications:Mechanical Design:Push-Pull SystemBlades (2):Symmetrical Design, Fiber-Reinforced NylonRotor Materials:ABS Plastic

Commenti su questo manuale

Nessun commento

Great-planes V-Pitch Variable Pitch Prop System - GPMG4501 Manuale Utente

Navigare online o scaricare Manuale Utente per Apparecchiature per l'aria compressa Great-planes V-Pitch Variable Pitch Prop System - GPMG4501. Great Planes V-Pitch Variable Pitch Prop System - GPMG4501 User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature per l'aria compressa Great-planes V-Pitch Variable Pitch Prop System - GPMG4501